Click To Call(727) 619-2341Click To Get A Free Estimate
Sealed paver driveway beside a Seminole home

Richer color, full joints and easier cleanup

Paver Sealing in Seminole, FL

Call (727) 619-2341 for a free paver sealing estimate on your Seminole driveway, pool deck or patio.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.00 to $1.75 a sq ft to clean, sand and seal
Call Now(727) 619-2341

Who can seal pavers at my Seminole home?

A local contractor seals pavers across Seminole, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free and booking is your decision. Begin by calling (727) 619-2341.

Sealer deepens paver color, keeps joint sand from drifting and lets a hose carry off dirt and algae. Think of a driveway gone gray along the edges after a muggy summer, then dark, even and packed full again. A driveway takes tires and oil, and a pool deck takes splashing and bare feet, so each gets its own plan. Describe how you use each when you request a free estimate.

Call (727) 619-2341

Contractor with a sprayer and roller sealing a brick paver driveway
What's included

What is included when pavers are sealed in Seminole?

A sealing job has four stages: a walk-through, a wash, fresh joint sand and the sealer. The wash takes the most hours. For the details at your address, call (727) 619-2341.

Walk-through

Square footage, low spots, loose pavers, old sealer and places where water collects are noted before a price is set.

Wash

Algae, dirt, rust and leaf stains come off with cleaners suited to each, at a gentle setting.

Joint sand

Sand fills each gap so pavers lock together and weeds find less room.

Sealer coat

Product goes on dry pavers in thin passes, at the coverage listed on the can.

How can I tell my pavers need sealing?

Look for chalky color, joints below the paver edges, sand scattered after a storm and water that soaks in instead of beading. Topping up sand early costs less than relaying pavers that have wandered. Want a quick opinion? Call (727) 619-2341.

Which paver sealer suits Florida weather?

No single product suits every home, so ask the contractor to name the sealer and explain the pick. Unilock says water-based sealers are the more environmentally friendly choice and soak well into porous concrete pavers, while a high sheen gloss can turn slippery when wet. To compare options on your surface, call (727) 619-2341.

Unilock also notes that sealers are not interchangeable: one made for concrete pavers may not suit brick or natural stone. Near the Gulf and the bay, a product with strong UV and salt resistance helps. Ask how each choice would look and wear on your pavers when you request a free estimate.

Should I choose a wet look or a natural finish?

Pick wet look for deeper color and shine, or natural to stay near the stone's unsealed appearance. Gloss can look wet and feel slick underfoot, so pool decks and steep driveways often suit a calmer sheen. Request a small test patch of each when you request a free estimate.

How often should pavers be sealed in Seminole?

Plan on every three to five years, the interval both Unilock and Belgard give. Open driveways, sprinkler spray and daily traffic pull it toward three, and covered spots can go longer. Water that soaks in rather than beading says the coat is spent. To have yours checked, call (727) 619-2341.

Does more sealer mean more protection?

No. Belgard says to seal no more than once every three years and no more than twice in total, because layers build into a film that can discolor in sunlight. Unilock adds that trapped moisture or a second coat applied too soon can leave a whitish film. Treat a bid that leans on extra coats with caution, and ask for the coverage rate before you request a free estimate.

When is the right time to seal pavers in Seminole?

Pick a dry stretch with temperatures between 50 and 90 degrees, which is the range Unilock gives, and 24 to 48 hours of clear weather after. Nearly two thirds of the rain in Pinellas County falls from June through September, so cooler, drier months often leave longer windows. To pick a date that suits the forecast, call (727) 619-2341.

Brand-new pavers have to wait. Unilock says to hold off 60 to 90 days after installation so efflorescence can clear. Sprinklers must be off while the coat cures. Newer install? Mention the date when you request a free estimate.

Will sealing fix sunken pavers?

No. Unilock says sealing will not fix drainage or base problems, so a sunken section has to be lifted and leveled first. Ask whether the quote includes that work. Joint sand also comes in shades, and one close to your pavers looks more even. Raise both when you request a free estimate.

Contractor walking a homeowner around a paver driveway with a clipboard
Surfaces

Which paver surfaces can be sealed?

Any paved area at the house can be sealed, whether driveway, pool deck, patio or walk. Each takes wear in its own way, so the plan matches how the space is used. Start with yours: request a free estimate.

Driveways

Tires, oil drips and long afternoons of sun all land on the driveway. Sealing one keeps the color even and the joints full under the weight of a parked car.

Pool decks and lanais

Pool decks take splashing, chemicals and bare feet all day. Sealing one should leave a surface that drains and keeps its grip.

Patios

A patio with trees or a screen nearby stays damp, so algae settles in and lingers. Sealing one is mostly about clearing those green patches and slowing their return.

Walkways and entries

Front walks sit beside mulch, soil and sprinkler heads. Sealing a walk is a small job, and it is the first surface a guest steps on.

Common problems

What paver problems are common in Seminole?

Five problems turn up again and again in Seminole: bleached color, green growth, lost joint sand, sprinkler marks and clouded old sealer. Call (727) 619-2341 to have yours inspected.

1. Color that sun has bleached

Summer highs in this part of Pinellas County reach the low 90s, according to Wikipedia. A driveway in open sun takes that all afternoon, and unprotected color goes chalky first.

2. Green film where water lingers

Seminole sits about 3 feet above sea level, and a shaded corner or a spot under a roof edge can stay wet for days. Algae loves that, and it turns slick on a deck or front step.

3. Joint sand washed out by storms

Rain here comes in heavy bursts, and it carries sand out of the seams. Once the joints run low, pavers can shift and weeds move in, so sand goes back before any sealer.

4. Orange and gray sprinkler marks

A spray head aimed at one edge each morning leaves streaks on the paver and the wall beside it. Those marks need their own cleaner, because sealer would lock them in.

5. Old sealer that has clouded

A coat that trapped moisture can turn milky or lift. Unilock says a second coat applied too soon can leave a whitish film, so the old layer is dealt with before anything new goes on.

Pricing

What does paver sealing cost in Seminole?

Sealing in Seminole commonly runs $1.00 to $1.75 per square foot to clean, sand and seal, the range Tampa Bay paver companies publish. Size of the area moves the price most, and the shape the pavers are in comes next. Heavy staining, sunken sections and old sealer to strip all add labor. To turn the range into a figure for your home, request a free estimate.

Sealer itself is a modest part of the bill. Unilock lists $80 to $150 a gallon, so the work of washing, sanding and applying makes up most of the price. Compare what each quote includes. Not ready to seal? Read about paver cleaning and joint sand, or see the service area list and the paver sealing in Seminole home page.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$300 to $525
600 sq ftTwo car driveway$600 to $1,050
1,000 sq ftLarge driveway or pool deck$1,000 to $1,750
1,500 sq ftDriveway plus pool deck$1,500 to $2,625

Math based on the $1.00 to $1.75 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Paver pool deck beside a screen enclosure
Why choose us

Why use a local contractor for paver sealing?

A local contractor already works under the sun, rain and wet ground your pavers live with. Get the figure in writing, then take whatever time the decision needs. To get going, call (727) 619-2341.

Someone who works nearby

A contractor that already covers this part of Pinellas County knows the low, wet ground and the heavy summer rain. Your visit starts with that experience.

A free price, with no pressure

You hear a number without paying for the visit. Any deal is made with the contractor directly, and you can say no.

A range to check against

Tampa Bay paver companies publish rates per square foot, and the range is on this site. A bid well outside it is worth a follow-up call.

Your timeline

Get the details in writing and take a few days. See the contractor standards page for the points worth confirming.

How do I get a free paver sealing estimate?

Call or use the short form, and expect an answer within 1 business day, usually much sooner.

Call (727) 619-2341

Free, no obligation

Even-toned pavers with packed joints right after sealing
Photos

What do pavers look like after sealing in Seminole?

Freshly sealed paver driveway at a Pinellas County home
Sealed paver pool deck at a Pinellas County home
Sealed paver patio behind the home at a Pinellas County home
Sealed paver walkway to a front door at a Pinellas County home
Close view of freshly sealed pavers at a Pinellas County home
Paver area with one cleaned half beside a dirty half at a Pinellas County home
Contractor cleaning pavers at a Pinellas County home
Contractor sealing or sanding pavers at a Pinellas County home
How it works

How does the paver sealing process work in Seminole?

Sealing follows five steps in order, beginning with an inspection and ending with a walk around the finished area. To reserve a slot, call (727) 619-2341.

1. Measure and inspect

Before quoting the sealing job, the contractor measures the paved area. Low spots, loose pavers, old sealer and places where water collects all go in the notes.

2. Protect and wash

Plants, screens and the garage door are covered and the irrigation is switched off. A surface cleaner then washes at a low setting, so the joint sand stays where it is.

3. Treat the stains

Algae, rust, oil and leaf marks each get a cleaner meant for them, tried on a hidden spot first. Unilock names white vinegar for mold and warns against wire brushes.

4. Refill the joints

When the stones have dried, joint sand is broomed in and compacted. Loose grains are blown off the face of the stone.

5. Seal and walk it with you

If sealer is in the plan, it goes on in thin coats by sprayer and roller. The contractor then walks the finished area with you and says how long feet and cars stay off.

Questions

Frequently Asked Questions

How often should pavers be resealed in Florida?

Unilock and Belgard both say every three to five years. Sun, sprinkler spray and daily car traffic shorten that, while a shaded walk can keep a coat longer. Belgard warns against sealing more than once every three years.

What is the average cost to seal pavers in Florida?

Tampa Bay paver companies publish $1.00 to $1.75 per square foot to clean, sand and seal. A 600 square foot driveway in Seminole works out to about $600 to $1,050. Stripping old sealer and leveling sunken pavers are normally extra.

Is it worth it to seal your pavers?

Often, if the color has faded or the joints have thinned. Unilock says sealing is optional, yet it resists fading and mildew and makes the surface easier to wash. It will not fix drainage or a poor base.

What should I clean pavers with before sealing?

Start with mild detergent and water, about half a cup to a liter according to Unilock. Mold can be treated with white vinegar, and Unilock warns against wire brushes, which can leave particles that rust. Everything must dry before sealer goes on.

What are the downsides of sealing pavers?

It is a repeat cost, and a glossy finish can be slippery when wet. Unilock also says trapped moisture, too much product or a second coat applied too soon can leave a whitish film.

Is it better to spray or roll paver sealer?

Many contractors use both. Unilock describes soaking the surface with a pump sprayer, then using a dry roller to take up extra and prevent streaks. Ask how the contractor plans to apply it to your pavers.

How much sealer does a Seminole driveway need?

Unilock lists about 80 to 120 square feet per gallon for solvent-based sealer and 100 to 150 for water-based. A 600 square foot driveway then takes roughly 4 to 8 gallons for one coat. Ask for the product and its coverage in the quote.

Will a summer storm in Seminole ruin a sealing job?

Rain too soon can leave a cloudy film. Unilock asks for 24 to 48 hours of dry weather afterward, and Wikipedia says nearly two thirds of Pinellas County rain falls from June through September. Contractors here watch the radar and move the day.

Does sealing help pavers near the water in Seminole?

It can. Unilock says a sealer with strong UV and salt resistance helps in coastal Florida. Ask the contractor which product is meant for a home near Lake Seminole or the bay, and whether the pool deck gets a finish with some grip.

Ready to bring your pavers back to life?

Tell a contractor what the driveway, deck or walk looks like now. The estimate is free, and the first reply lands inside 1 business day, usually much sooner.

Call (727) 619-2341

Free, no obligation