Click To Call(727) 619-2341Click To Get A Free Estimate
Sealed brick paver driveway at a home in Kenwood

Paver sealing for Kenwood homes

Paver Sealing in Kenwood, FL

On the plateau streets of Kenwood, bungalow front walks and drives get a free sealing estimate at (727) 619-2341.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.00 to $1.75 a sq ft to clean, sand and seal
Call Now(727) 619-2341
Paver sealing

Fast, careful paver sealing in Kenwood

Paver sealing in Kenwood is available to homes on the bungalow blocks west of downtown, from Seminole Park to the streets beside 34th Street. A local contractor washes, re-sands and seals front walks, drives and back patios, and the estimate is free. Reply time is 1 business day at most, and usually much sooner, once you request a free estimate.

Think of the front walk to a bungalow porch, gray and speckled with leaf stain after a few seasons under the oaks. After a wash, new sand and a coat, it matches the paint again and stops drawing the eye. Call (727) 619-2341 and describe the walk, the drive or the garage apartment path you want looked at.

Call (727) 619-2341

Family relaxing by a sealed paver pool deck near Kenwood
Why hire local

Why hire a local paver sealing contractor in Kenwood?

Kenwood owners tend to pick a local paver contractor because old oaks, brick avenues and historic review all shape the job. To hear how that applies to your lot, request a free estimate.

A free walk-through

The contractor looks over your Kenwood walk, drive or patio and checks the joints first. You get a price before anyone agrees to a thing.

A range to test against

Tampa Bay companies commonly publish $1.00 to $1.75 per square foot to clean, sand and seal. A Kenwood quote should sit near that.

A finish for a bungalow

Natural-look keeps pavers quiet beside Craftsman trim. A wet look adds depth, though a busy driveway will show wear marks sooner.

You keep control

You pick the day and the finish, and you can decline the estimate with no fuss. Replies come within 1 business day, and the estimate is free.

Get Your Free Estimate in Kenwood

Tell us about your pavers in Kenwood.

Call (727) 619-2341

Free, no obligation

Paver joint sand detail on a walkway near Kenwood
Common problems

What paver problems show up most in Kenwood?

Leaf stain under the big oaks

Kenwood's streets are lined with large oaks, along with jacaranda, palms and pines. Oak leaves and acorns leave tannin stains on under-sealed pavers, a Tampa Bay paver company reports. Shade also keeps surfaces damp, so the north side of a bungalow often goes green first. A wash removes the stain, and a sealer coat makes the next round easier to rinse away. Some old tannin marks fade a lot and a few stay faintly visible.

Sand that runs toward the curb

The district sits on a plateau about 50 feet above sea level, and about 52 inches of rain fall on St. Petersburg in a typical year, most of it from June through September. Water running off a raised lot tends to carry loose joint sand along. A paving article says joints should be topped up after a power wash. Run a finger along a joint near the curb, and if it feels empty, the contractor will want to fill it before sealing.

Pavers beside brick and granite

Most east-west avenues here are still brick, many sidewalks use hexagonal pavers and high granite curbs line the streets. Your own pavers may sit right against old masonry the city owns. Rinse water and cleaners have to be steered so they do not stain it or run into a neighbor's yard. Ask how the crew plans to protect the brick before the day begins.

Early 2000s pavers due for a coat

A Tampa paver company names Historic Kenwood among the neighborhoods where pavers put in during the early 2000s now need cleaning, new joint sand and a fresh coat. If your drive or patio dates from then, it may be past its first sealer. Water that soaks in instead of beading is a clue, and the contractor can show you the test.

Front walks back in the spotlight

Since the early 1990s, owners have removed vinyl siding and reopened enclosed front porches across Kenwood. That puts the steps and the walk in clear view from the street. Faded color and green edges show more when the porch is open and freshly painted. Sealing brings the walk up to the standard of the house.

Neighborhoods

What should a Kenwood homeowner tell a contractor about the house?

What age and style is your house?

Start with the age and the style, because Kenwood is mostly one and two story homes built between 1912 and 1945, and more than half are bungalows. When you request a free estimate, say which part of the property needs work.

Does a moved bungalow change the lot?

Many bungalows were moved here in the 1930s from other parts of the city, so lots and drives vary. Mention a garage apartment if you have one, since those outbuildings are common. Call (727) 619-2341 and describe the layout.

Is your block in a historic pocket?

Say if you live in one of the local historic pockets. Seminole Park, Southeast Kenwood and Northwest Kenwood each hold local status, and owners there must get a certificate of appropriateness for exterior changes. To ask which applies, call (727) 619-2341.

Does sealing need city sign-off?

Sealing is upkeep rather than a redesign, but a quick call to city staff settles any doubt. The contractor can suggest what to ask when you request a free estimate.

Where inside Kenwood do the pavers sit?

Southwest Central Kenwood, between 26th and 28th Streets and 1st and 5th Avenues North, holds 150 parcels with homes built from 1917 to 1958. Note where your pavers sit in that grid. When you request a free estimate, name your cross streets.

Does street traffic change the job?

Blocks near St. Petersburg High School on 5th Avenue North carry more street traffic than quiet side streets. Tell the contractor about the block when you request a free estimate.

What about garage apartments and side drives?

Garages and garage apartments are common outbuildings in Kenwood. A side drive or a back walk is worth mentioning when you request a free estimate.

How many homes share the ZIP?

ZIP code 33713 has 31,321 residents and 14,278 households across 6.536 square miles, with about 68.7 percent of occupied homes owner-occupied. Many Kenwood owners can decide on sealing themselves. To get a figure, call (727) 619-2341.

Do brick avenues and hex sidewalks matter?

Brick avenues, hex sidewalks and granite curbs are part of the Kenwood streetscape. A pavement edge that meets one of them needs a careful rinse. Mention such an edge when you request a free estimate.

Is your house near Seminole Park?

Seminole Park is a rectangular park bounded by 3rd Avenue North, Burlington Avenue North, 30th Street North and 29th Street North, with a Craftsman-style pavilion in its center. Homes around it are easy to place on a map. Name the park when you request a free estimate.

Pricing

What does paver sealing cost in Kenwood?

What sets the price in Kenwood?

A range of $1.00 to $1.75 per square foot to clean, sand and seal is what Tampa Bay companies commonly publish. In Kenwood, heavy leaf stain, thin joints and old sealer decide where a lot falls within that range. To price your pavers, request a free estimate.

Do several small areas add up?

A long walk plus a drive and a patio adds up, though the rate stays put. Request each area as a separate line. Call (727) 619-2341 and list every paved spot.

Does access change the price?

Access can move the number too. A tight side path to a garage apartment takes more hand work than an open drive. Call (727) 619-2341 and the contractor can talk through which of these apply to you.

Is masking part of the job?

A St. Petersburg painting company says crews tape off stucco wall bases and pool coping before work begins. On older lots with stucco, brick edges and flower beds, that masking adds time. Ask to see it on the quote when you request a free estimate.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$300 to $525
600 sq ftTwo car driveway$600 to $1,050
1,000 sq ftLarge driveway or pool deck$1,000 to $1,750
1,500 sq ftDriveway plus pool deck$1,500 to $2,625

Math based on the $1.00 to $1.75 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractors sealing a paver driveway at a home in Kenwood
How it works

How does a paver sealing job work in Kenwood?

Look at the walk, the drive and the edges

The contractor starts at the street and walks toward the porch, noting each paved area as they go. They check slope, shade, sunken spots and where the pavers meet brick or curb. A sunken paver keeps its dip under a coat of sealer, so it is flagged now. If a coat was put down earlier, the type matters.

Wash away leaf stain and green film

Washing comes next, aimed at oak stain, algae and general grime. Rust and oil spots get their own treatment, and so does any white bloom near the edges. Rinse water is steered away from old masonry, plant beds, porch paint and the neighbor's fence line. Moss in the seams needs extra attention.

Refill the joints with fresh sand

Washing pulls sand out of the joints, so new sand goes in before anything is sealed. A paving article says joints should be topped up after power washing. Full joints keep the pavers steady and give weeds less room. A final sweep leaves the faces clean, since stray grains would cling to the wet sealer and show as specks.

Dry first, seal second

Pavers have to be dry before any sealer goes on. In St. Petersburg's rainy season, from June through September, the contractor reads the surface itself instead of trusting the clock. Walks under oaks may need extra time, since leaves keep them damp into the afternoon. If a storm rolls in, the day moves.

Seal and keep traffic off

Thin, even coats keep the finish from blotching or pooling in low spots. People can walk on it in about a day, and one Tampa Bay company puts the wait for cars at two to three days. Edges near brick and the base of the porch are checked for stray sealer, and the contractor walks the job with you before leaving.

Services

Complete paver services in Kenwood

A Kenwood job starts with a close look and ends with sealer. In between, the contractor washes off leaf stain, tops up the joint sand and waits for a dry surface. Doing it in that order keeps dirt from being locked under the coat. Call (727) 619-2341 to hear how long each stage takes on a bungalow lot.

Surfaces here are mixed. Front walks and porch steps get close looks from visitors, drives take tires, and back patios behind garage apartments sit in shade. The back patio may stay green while the drive only fades. When you request a free estimate, list every paved area you want priced.

Sealer choice starts with the old coat. If a solvent-based coat is already on, a water-based one cannot follow, so the contractor asks first. After that, you choose matte or wet look, and a Tampa Bay guide calls wet look the most requested finish. A test corner lets you see it first, so request a free estimate to ask for one.

Timing follows the weather. June through September is the wet stretch in St. Petersburg, and sealer waits for dry pavers, so shaded Kenwood walks may wait longer than open drives. A St. Petersburg company says pavers need time to dry before any coating. Call (727) 619-2341 and the contractor can pick a day that fits the forecast.

Questions to ask before you hire

  • Is a slip resistant additive an option for my pool deck?
  • Can you seal in the morning and finish before the afternoon thunderstorms roll in?
  • Can you tell whether an old coat of sealer is still on my pavers before you decide to strip it?
  • Will you point out cracked or sunken pavers before any work starts?
  • Can you test a small corner first so I can choose between matte and gloss?
  • How long should my car stay off the driveway after sealing?
  • How do you protect my screen cage and pool equipment during the wash?
Photos

What do sealed pavers look like around Kenwood?

Freshly sealed paver driveway near Kenwood
Sealed paver pool deck near Kenwood
Sealed paver patio behind the home near Kenwood
Sealed paver walkway to a front door near Kenwood
Close view of freshly sealed pavers near Kenwood
Paver area with one cleaned half beside a dirty half near Kenwood
Contractor cleaning pavers near Kenwood
Contractor sealing or sanding pavers near Kenwood
Contractor talking through a paver sealing estimate with a homeowner in Kenwood
Local

Why local matters in Kenwood

Why do brick avenues and curbs matter?

A contractor who works Kenwood plans the rinse to protect old masonry. That means brick avenues, hex sidewalks and granite curbs stay clean. To get in touch with a contractor who works these blocks, call (727) 619-2341.

What could a rinse do to old masonry?

Someone who has not seen those streets may wash toward the old masonry. That can stain it or loosen its mortar, and neither is easy to undo. Ask how the rinse will be aimed when you request a free estimate.

Why does the rainy season matter?

Local experience also covers the calendar. Rain in Pinellas County comes hard from June through September, and shaded bungalow lots dry slowly. A contractor who has done it before will plan the sealing days around that pattern, so request a free estimate and ask how a schedule would work.

Do shaded lots dry slowly?

Shaded bungalow lots dry slowly after a storm. A coat laid over damp pavers can turn cloudy, so the sealing day waits. Ask how the contractor checks for dryness when you request a free estimate.

Why does leaf stain come first?

Heavy leaf stain is common on shaded Kenwood lots, which is why washing comes before sand and sealer. A coat laid over stain keeps it. Ask how stains are treated when you request a free estimate.

Why does historic review matter?

Historic review is another reason. Seminole Park and two other pockets have local status, and exterior changes need city sign-off there. A contractor familiar with the district knows to ask whether your address is covered. You can request a free estimate and mention your cross streets.

Do street trees stain pavers?

Large oaks, jacaranda, palms and pines line Kenwood's streets. Oak leaves and acorns leave tannin stains on under-sealed pavers, according to a Tampa Bay paver company. Ask how tannin is treated when you request a free estimate.

Local roots

Why do Kenwood's bungalows and brick avenues matter to a contractor?

How old is Kenwood?

Kenwood was platted in 1912 and filled fast in the 1920s land boom, so most pavers sit beside homes that are older than the pavers. To ask about your street, request a free estimate.

What landmarks anchor Kenwood?

St. Petersburg High School was built in 1926 on 5th Avenue North, and Seminole Park gave the neighborhood a green center. If you are close to either spot, call (727) 619-2341 and name your street.

What happened after the 1950s?

After a slow stretch from the 1950s, Interstate 275 became the eastern edge in the 1970s and revival began in the early 1990s. Owners restored siding and porches, and the work continues along the bungalow blocks. Call (727) 619-2341 and ask about a visit.

Where are Kenwood's other edges?

34th Street forms the western side, and Central Avenue runs along the south. If you are near Seminole Park or the high school, request a free estimate and say which.

When did Kenwood fill in?

Kenwood saw infill building after World War II until the early 1960s, helped by the 34th Street link to the Gulf Coast Highway in July 1955. The nearby Central Plaza shopping area added to the growth. Give a rough install date when you request a free estimate.

Do different decades mean different pavers?

Houses built in different decades often carry pavers of different ages. A drive and a walk may not match in age. Call (727) 619-2341 and describe each.

Does Kenwood's high ground help?

Historic Kenwood sits on a plateau about 50 feet above sea level, much higher than other St. Petersburg neighborhoods. Higher ground can drain faster, though shaded bungalow lots still hold damp. Mention where water lingers when you request a free estimate.

How big is the historic district?

The Kenwood Historic District covers 375 acres and holds 2,203 historic buildings, mostly one and two story homes built between 1912 and 1945. That many old buildings means many old walks and drives. Call (727) 619-2341 to ask about yours.

How did owners bring Kenwood back?

Owners since the early 1990s have restored homes by removing vinyl and aluminum siding and reopening front porches that were once enclosed. A reopened porch puts its walk back in view. To have yours looked at, call (727) 619-2341.

Questions

Frequently Asked Questions

How often should a Kenwood bungalow's pavers be sealed?

A typical gap between coats is two to five years, according to company quotes. Full-sun drives often need attention near the three-year mark, one Tampa Bay company notes, while covered patios last longer. A shaded Kenwood walk under oaks may need a look sooner because of stain and algae.

Why is paver sealing so expensive in Kenwood?

Most of the cost is the work before the sealer, which includes washing, drying and new joint sand. Tampa Bay companies commonly publish $1.00 to $1.75 per square foot for the full job. Small jobs can hit a company's minimum charge, so listing every area in one visit helps.

Is there a drawback to sealing a Kenwood driveway?

Sealer wears out in time and needs another coat, and scuffs read louder on a wet look than on matte. Wet pavers have to wait, so a shaded Kenwood walk can push the date back. The bigger risk is sealing over dirt or an unknown old coat, which is why the washing step and the coat check matter so much.

What does it cost to seal pavers in Kenwood?

The published Tampa Bay range is $1.00 to $1.75 per square foot, covering the wash, new sand and sealer. Oak stain, thin joints and old sealer move a Kenwood job within it. Have the quote list the walk, the drive and the patio as separate lines.

Do Kenwood's local historic districts affect paver sealing?

Seminole Park, Southeast Kenwood and Northwest Kenwood have local status, and owners there need a certificate of appropriateness for exterior changes. Sealing is upkeep, but call city preservation staff if you are unsure. A contractor can tell you what to ask.

Should I pick matte or wet look for a bungalow?

Matte is quiet and hides scuffs longer, which suits Craftsman trim. Wet look adds depth to the color but it scuffs visibly sooner. A small test corner lets you compare both in your own light. Look at it in the morning and again in late afternoon, since shade changes how a sheen reads.

What happens to the joint sand when pavers are washed?

Washing pulls sand out, so the contractor puts fresh sand back before sealing. Full joints keep the pavers steady and leave weeds less room. Skipping this step leaves open gaps under the coat. Open gaps let soil in over time, and that soil becomes a home for weeds.

How long before I can drive on freshly sealed pavers?

Foot traffic is usually fine after about 24 hours, with cars waiting 48 to 72 hours, one Tampa Bay company says. Keep the car on the street until then. The contractor will confirm the time for the product used. A cooler, damp week can stretch it a little.

Ready for a Free Estimate in Kenwood?

Call (727) 619-2341 and tell us about your pavers.

Call (727) 619-2341

Free, no obligation